- Published on
TRANSNET
MASTER INSTALLATION ELECTRICIAN
Operating Division: Transnet Pipelines
Employee Group: Permanent
Department: OPS & TEC, M&W, Electrical, CBK
Location: Coalbrook
Reporting To: Electrical Supervisor
Grade: H3
Reference: req5438
The closing date is on 17/08/2026. It is the responsibility of the applicant to ensure that HR has received the application before the closing date of the advertisement.
Position Purpose
The Master Installation Electrician is a person who has been registered as a Master Installation Electrician in terms of regulation 9 and who has been approved by the Chief Inspector for the verification and certification of the construction, testing and inspection of any electrical installation for efficient and effective custody, transfer and transport of petroleum products in liaison with Operations, Instrumentation and Mechanical departments in Transnet Pipelines.
The Master Installation Electrician is responsible for electrical scheduling, inspection and to ensure safe working conditions.
Position Outputs
1) Managing of COC’s (Certificate of compliance) a. Undertake periodic inspections and issuing COC’s as per National Codes and OSH Act b. Conduct 2Y compulsory OHSact Hazardous area equipment inspections. c. Maintain depot COC’s and compliance of Electrical Equipment housed in Hazardous areas.
2) Give guidance and oversee Electrical Installations 3) Control the integrity of Equipment •Ensure the correct application of the correct Electrical equipment in the Plant/operations.
4) PREVENTATIVE MAINTENANCE • To perform preventative maintenance tasks on electrical equipment by detecting, repairing and reporting minor defects as well as reporting major defects thereby ensuring reliable equipment for the continuous operation of the pipeline e.g. 220V-3.3 Kv motors, control gear and trip protection equipment e.g Actuators.
5) DEFECT REPAIR • Identify, analyse and repair defects on installed (live) equipment. Repair specific installed (live) equipment by performing diagnostic tests to identify defects and effect repairs. Reading and understanding schematics and reports are essential e.g. Mainline motor starter and trip protection, 380V panel starters and trip protection.
6) BONDING • Witness and install
7) REMOVE AND REPLACE INSTALLED (LIVE) EQUIPMENT •Removal and replacement of specific equipment by planning the complete installation, isolation and removal of the equipment as well as preparing and installing the replacement, energising and testing the operations of the equipment e.g. Main motors, Actuators, lights, cranes, enclosures, isolators and stop/start stations.
8) REFURBISHMENT AND MODIFICATION ELECTRICAL EQUIPMENT Refurbishing equipment by disassembling the equipment, replacing defective parts, reassembling and testing the equipment to the manufacturers specification e.g. • Starters • Actuators • Certify all refurbished Equipment.
9) HIGH VOLTAGE EQUIPMENT Obtaining authorisation and undertaking switching (A-Brown) and earthing on high voltage switchgear and equipment up to 132KV, issuing of work and test permits as well as undertaking maintenance of the above equipment. Also supervise unathorised personnel in substations and HT yards Work to a clearance of live high voltage equipment as per electrical HIGH VOLTAGE instructions.
10) SAFETY • Attend Meetings • Do Safety Inspections • Use of safety equipment • Ensure compliance of Equipment for flameproof safety and standards • Assist with Job Observations and Supervision of personnel.
11) ADMIN The effective control of administration duties which includes:- • Reports (defect, inspection) • Obtain and cancel hot work permits (Electrical) • Job cards • Operate SAP Modules (MM & IM) • Maintain records, registers and COC’s as per applicable legislation • Assist with internal electrical audits. • Assist with Acting as an Electrical Supervisor as and when required.
Qualifications and Experience
Essential Requirements: Trade Test Electrical (3 years) with 3 years Technical/Electrical on the Job experience. Must have adequate knowledge of all electrical equipment on Transnet Pipelines to be able to function on his/her own. The following courses must be passed with practical on the job experience during the three years’ experience in Transnet Pipelines. Obtain qualification and accreditation to qualify for a Master Installation Electrician Register at the Department of Labour as a Master Installation Electrician and complete 2 years on the Job Training and exposure and obtain final Accreditation. Computer literate SAP Course in Plant Maintenance (MM & IM Modules). Purchasing and Inventory, Word Excel, etc. High Voltage safety instructions (A-Brown) Thereafter a person has to get practical experience (training) on depots in the region until passed out. He/she has to attend a refresher course every two years and get tested and recertified every two years. NOSA (Safety) course Fire Fighting Oil spill course First Aid Level 2 Rotork actuator course on A-Range, IQT and IQ-Range Electrical motor course Transformer (HT) course Working in confined spaces Crossings and Cathodic Protection course ( Basic course) Theory: Operations Course: Thereafter a person has to get practical experience (training) on the depot where based until passes out on depot/manifold(s) Knowledge of testing instruments i.e. Megger, Thumper etc Code 8 driver’s licence, Wireman’s licence, Explosion Protection for Plant Maintenance Technicians(electrical and instrumentation)
Competencies
Computer Literate. SAP_PM Literacy. Knowledge of applicable tools and equipment. Knowledge of Code of Practice 29. Leadership skills. Communication skills. Ability to work as a team member. Problem solving. – Root cause analysis Interpersonal skills. Basic knowledge and application of OHS Act.
Equity Statement
Preference will be given to suitably qualified Applicants who are members of the designated groups in line with the Employment Equity Plan and Targets of the Organisation/Operating Division.
Disclaimer
If you have not heard from Transnet within 90 days, please consider your application as unsuccessful.
Transnet, its employees or representatives never ask for a fee from job seekers. Any such requests are fraudulent. Please report any suspicious activities in this regard to the Transnet anti-fraud line on 0800 003 056 or email reportit@ethicshelpdesk.com
SECOND ENGINEER OFFICER
Operating Division: Transnet NPA
Employee Group: Permanent
Department: DRG, Ilembe Shift A, Vessel Maint.
Location: Durban
Reporting To: Chief Engineer Officer
Grade: F
Reference: req5391
The closing date is on 13/08/2026. It is the responsibility of the applicant to ensure that HR has received the application before the closing date of the advertisement.
Position Purpose
To represent the fleet department in overall responsibility and accountability whilst operating in port limits for all aspects of the maintenance and operating of propulsion engines, other engines, deck machinery, refrigeration and sanitary equipment, aboard the vessel by coordinating and directing subordinates whilst complying with statutory laws, company policies and safety regulations, thereby ensuring maximum dredger availability
Position Outputs
1. Plan, compile and control annual lay-up maintenance to ensure that expenditure remains within the parameters set by the fleet department
2. Training and development of cadet engineers and ongoing training of certificated engineers to enhance marine engineering skills and practices
3. Liaise with and control external contractors to ensure that the maintenance and repairs are carried out within set time frames and conform to speculations
4. Liaise with maintenance manager to ensure that critical and other spares available timely in order to optimise utilisation and production of the vessel
5. Ensure international and local maritime laws and practices are conformed to thereby ensuring the safety and wellbeing of vessel and crew
6. Control the ordering of and optimal consumption of fuel and lubricating oils thereby optimising the utilisation of the vessel and minimise expenditure
7. Plan and control preventative maintenance systems to ensure problem free running of all machinery thereby minimising downtime
8. Practice loss control by regular inspections of machinery spaces to determine unsafe acts and correcting where necessary
9. Plan and organise the preparation of the vessel to proceed to sea ensuring that all safety measures regarding seaworthiness are intact
Qualifications and Experience
Qualifications & Experience: - Certificate of Competency as a Second Engineer (unlimited) - At least 1 to 3 years' experience working as a second engineer. Knowledge Standard Job Requirements: - Drivers license code 8 - Travel as required by the business - Requirement of trust and honesty in the handling of Finances as per the National Credit Act Amendment 19.
Competencies
Knowledge Required: - Integrate drawings Ability to solve technical issues - Overall knowledge on mechanical and electrical equipment, high and low voltage - Company policies - OHSACT - MARPOL Collision Regulations - SOLAS - Merchant Shipping ACT, IMO Regulations Skills Required: - Negotiations - Communication - Interpersonal Skills - Analytical Ability - Computer Literacy
Equity Statement
Preference will be given to suitably qualified Applicants who are members of the designated groups in line with the Employment Equity Plan and Targets of the Organisation/Operating Division.
Disclaimer
If you have not heard from Transnet within 90 days, please consider your application as unsuccessful.
Transnet, its employees or representatives never ask for a fee from job seekers. Any such requests are fraudulent. Please report any suspicious activities in this regard to the Transnet anti-fraud line on 0800 003 056 or email reportit@ethicshelpdesk.com
