- Published on
TRANSNET
AIRCRAFT MAINTENANCE ENGINEER: AVIONICS
Operating Division: Transnet NPA
Employee Group: Permanent
Department: NGQ, Aviation Operations, DNR
Location: Richards Bay
Reporting To: Senior Aircraft Maintenance Engineer
Grade: AS1
Reference: req5183
The closing date is on 08/07/2026. It is the responsibility of the applicant to ensure that HR has received the application before the closing date of the advertisement.
Position Purpose
Responsible for performing all avionic & technical maintenance activities as determined in the Maintenance Schedule and recording of all discrepancies identified during the required inspection operations. Certifying maintenance release of all avionics work as per TNPA and regulator authorisations. Ensuring the provision of airworthy aircraft, complying with manufacturers, regulatory authorities, and TNPA processes and procedures.
Position Outputs
• Perform all Avionics technical maintenance activities as determined in the Maintenance Schedule and when necessary, record all discrepancies identified during the required inspection operations.
• Signs maintenance release of all avionic work when authorised.
• Ensure provision of an airworthy aircraft, complying with manufacturers, regulatory authority, and TNPA standards to the customer.
• Maintain high technical standards and readiness of TNPA aircraft for efficient service delivery.
• Record all activities being performed through the use of approved documentation in a clear and concise manner showing all actions taken as a result of work accomplished.
• Maintain sound technical practices that include systematic troubleshooting to determine aircraft malfunctions and rectification.
• Perform all maintenance activities (including compass swings, radio, instrumentation, electrical cabling and modifications) as determined in the Approved Schedule and when necessary, record all discrepancies identified during the required inspection process for analysis.
• Thorough knowledge and application of the requirements of the Manual of Procedures, CAR’s of 2011, SAMSA regulations, Approved Schedules, Manufacturers Manuals Airworthiness Directives and Airworthiness Notices.
• Accurate isolation of defects and corrective action planning.
• Certify own work and as well as countersigning work of other engineers as well as junior engineers in training in accordance with operating procedures.
• Maintain vigilance at all times for discrepancies, which may occur during operation of aircraft and rectify them correctly in the shortest possible time.
• Hold current AME license with ratings applicable to TNPA aircraft, for installation of avionics equipment, functional testing and release to service.
• Ensure that TNPA aircraft have valid and correct technical documentation and functioning avionics systems at all times.
• Maintain sound technical practices at all times and adhere to airworthiness codes and safety standards.
• Log all activities being performed through the use of approved documentation in a clear and concise manner showing all actions taken and work accomplished.
• Use the correct tooling and equipment to perform required work operations on airborne navigation/communications systems, weather radar, autopilot, flight instrument systems and accessories.
• Carry out pre-flight and after-flight inspections on every flight mission.
• Assists with Mechanical work where necessary and ensure that TNPA aircraft are safe for operation at all times.
• Supervision, mentorship and endorsement of junior engineers’ logbooks.
Qualifications and Experience
• Hold a valid AME license applicable to TNPA aircraft with W or X ratings. • Trade certificate. • Avionics general certificate. • Aircraft type course (s). • 3 years aircraft maintenance experience as a qualified avionics AME.
Competencies
Knowledge: • Aviation rules and safety guidelines • Aircraft operation procedures & systems • Public safety & security • Transportation systems & procedures. • Avionic systems, aircraft instruments & aircraft electrical systems. • Port rules • Customer & personal service • English language proficiency • Mathematical applications • Computers & electronic applications. • Flight theory & engineering practices Skills: • Good communication • Time management • Quick judgement & decision making • Operational control • Active listening • Technical trouble isolation & • rectification • Vigilance • Accuracy • Working with complex machines, tools & devices. • Social perceptiveness Attributes: • Decision making • Multi-tasking • Meticulous • Accuracy • Good communication • Teamwork
Equity Statement
Preference will be given to suitably qualified Applicants who are members of the designated groups in line with the Employment Equity Plan and Targets of the Organisation/Operating Division.
Disclaimer
If you have not heard from Transnet within 90 days, please consider your application as unsuccessful.
Transnet, its employees or representatives never ask for a fee from job seekers. Any such requests are fraudulent. Please report any suspicious activities in this regard to the Transnet anti-fraud line on 0800 003 056 or email reportit@ethicshelpdesk.com
AIRCRAFT MAINTENANCE ENGINEER - AME (MECHANICAL)
Operating Division: Transnet NPA
Employee Group: Permanent
Department: NGQ, Aviation Operations, DNR
Location: Richards Bay
Reporting To: Senior Aircraft Maintenance Engineer
Grade: AS1
Reference: req5182
The closing date is on 08/07/2026. It is the responsibility of the applicant to ensure that HR has received the application before the closing date of the advertisement.
Position Purpose
Responsible for performing all technical maintenance activities as determined in the Maintenance Schedule and recording of all discrepancies identified during the required inspection operations.
Certifying maintenance release of all technical work when authorised. Ensuring the provision of an airworthy aircraft, complying with manufacturers, regulatory authorities, and TNPA processes and procedures. Ensuring that high safety standards are adhered to at all times to mitigate risks associated with aviation operations.
Position Outputs
• Perform all mandatory periodic inspections (MPI) on TNPA aircraft as determined by local authority and equipment manufacturer.
• Rectify all technical defects in accordance with approved procedures.
• Ensure airworthiness and readiness of TNPA aircraft for efficient service delivery.
• Record all activities being performed through the use of approved documentation in a clear and concise manner showing all actions taken as a result of work accomplished.
• Maintain sound technical practices.
• Thorough knowledge and application of the requirements of the Manual of Procedures, CAR’s of 2011, Approved Schedules, Manufacturers Manuals Airworthiness Directives and Airworthiness Notices.
• Accurate trouble isolation of defects and rectification.
• Certify own work and as well as countersigning work of other engineers as well as junior engineers in training.
• Maintain vigilance at all times for discrepancies, which may occur during operation of aircraft and rectify them correctly in the shortest possible time.
• Hold current AME license with ratings applicable to TNPA aircraft.
• Ensure that TNPA aircraft have valid and correct technical documentation at all times.
• Maintain sound technical practices at all times and adhere to airworthiness codes.
• Log all activities being performed through the use of approved documentation in a clear and concise manner showing all actions taken and work accomplished.
• Ensure optimum ground support for TNPA aircraft.
• Carry out pre-flight and after-flight inspections on every flight mission.
Qualifications and Experience
• Hold an AME license rated on A109/AW109 series helicopters. • Rotorcraft general and turbine engine certification. • Trade certification. • 3 years aircraft maintenance experience. • Management qualification will be an added advantage.
Competencies
Competencies Required: Decision making, Multi-tasking, Meticulous, Accuracy, Good communication, Teamwork. Knowledge required: • Aviation rules and safety guidelines • Helicopter operation procedures & systems • Public safety & security • Transportation systems & procedures. • Aircraft systems, engines & airframes. • Port rules • Customer & personal service • English language proficiency • Mathematical applications • Computers & electronic applications. • Flight theory & engineering practices Skills Required: Good communication, Time management, Rapid judgement & decision making, Operational control, Active listening, Technical trouble isolation & rectification, Vigilance, Accuracy, Working with complex machines, tools & devices, Social perceptiveness/diversity management.
Equity Statement
Preference will be given to suitably qualified Applicants who are members of the designated groups in line with the Employment Equity Plan and Targets of the Organisation/Operating Division.
Disclaimer
If you have not heard from Transnet within 90 days, please consider your application as unsuccessful.
Transnet, its employees or representatives never ask for a fee from job seekers. Any such requests are fraudulent. Please report any suspicious activities in this regard to the Transnet anti-fraud line on 0800 003 056 or email reportit@ethicshelpdesk.com
SECOND ENGINEER - PORT OPERATIONS
Operating Division: Transnet NPA
Employee Group: Permanent
Department: Marine Services
Location: East London
Reporting To: Marine Technical Manager
Grade: I1X
Reference: req5259
The closing date is on 06/07/2026. It is the responsibility of the applicant to ensure that HR has received the application before the closing date of the advertisement.
Position Purpose
• Forms part of the engine room management team of the harbour craft as second engineer under the direction of the Chief Engineer Officer.
• Responsible for the operation and maintenance of plant, equipment and machinery, including operational watchkeeping duties, performance or
routine and unplanned maintenance in order to ensure a safe and efficient craft service to clients.
• To safeguard Company Assets as per legislative requirements i.t.o. the Merchant Shipping Act.
• Maintain and operate all machinery and equipment aboard crafts.
• Responsible for the safe and efficient operation of all machinery and engineering function
Position Outputs
Carry out independent watchkeeping duties in the engine room
Assist with ensuring the correct operation and running of machinery in the engine room.
Carry out tasks and functions as directed by the Chief Engineer
Carry out routine visual inspection of machinery and equipment as required.
Take necessary readings and soundings as required.
Record the results of all readings, soundings and inspections as required in the relevant logbook.
Report any anomalies discovered on machinery and equipment to the Chief Engineer.
Ensure liquid and pressure levels are correct in all Machinery.
Top-up liquid levels in machinery as required.
Monitor running machinery as required.
Assist with the Safe and efficient operation of Machinery.
Prepare main propulsion machinery for start-up.
Start up and maintain efficient operation of generators/alternators as directed.
Assist with emergency shutdowns as required.
Maintain and repair equipment as required.
Repair and maintain equipment as required.
Disassemble equipment and machinery.
Reassemble equipment and machinery.
Replace defective items on machinery and equipment.
Testing of equipment and machinery as required.
Maintain cleanliness in area of responsibility.
Ensure all waste is cleaned out of the engine room.
Ensure all equipment and materials are cleaned and properly stowed away after use.
Ensure all machinery is cleaned properly.
Ensure engine room is properly clean and wiped down.
Ensure all spillages are properly cleaned up.
Train AB Deck and Engineroom as and when required.
Qualifications and Experience
Qualifications & Experience: • Certificate of competency as Second Engineer(Port Operations) OR • Motorman HG issued in terms of the Merchant Shipping Act. OR • Officer in Charge of Engineering Watch OR • Designated Duty Engineer OR • Chief Eng. Officer (<1500 kW Port Operations) • And Valid Ancillary Courses • Medical First Aid • Personal Survival Technique • Proficiency in Survival Craft & Rescue Boats • Fire Prevention and Fire Fighting • Personal Safety & Social Responsibility
Competencies
Competencies Required: Knowledge required: • Risk & occupational safety • Quality management systems • Statutory/regulatory bodies • Environmental management principles • NOSA, ISO, OHS Act • Marine Operations/Services • Merchant Shipping Act- • SAMSA port marine operations related legislation Skills Required: • Leadership • Decision making • Communication • Building relationship • Managing subordinate • Ability to solve practical technical problems. • Procedures and work instructions (SHE integrated Management System, Quality Management System) • Knowledge of life-saving equipment/appliances • Safety techniques/equipment • Record-keeping • Emergency and evacuation procedures. • Marine plant, machinery and equipment • Watch-keeping procedures • Marine environment • Housekeeping
Equity Statement
Preference will be given to suitably qualified Applicants who are members of the designated groups in line with the Employment Equity Plan and Targets of the Organisation/Operating Division.
Disclaimer
If you have not heard from Transnet within 90 days, please consider your application as unsuccessful.
Transnet, its employees or representatives never ask for a fee from job seekers. Any such requests are fraudulent. Please report any suspicious activities in this regard to the Transnet anti-fraud line on 0800 003 056 or email reportit@ethicshelpdesk.com